Menzerna Heavy Cut Compound 400 250ml

Heavy Cut Compound 400

Our innovative Menzerna Heavy Cut Compound 400 for automotive clear coats leaves a dazzling impression everywhere. Gets sanding marks out of the way in record time. Works into the finish range thanks to the latest polishing technology with dividing polishing grit.

    NEW: Improved formulation
    NEW: Comfortable working thanks to improved removal of polish
    NEW: More pleasant to work with, as there is no solvent odor
    Polishes and produces gloss in one step
    Saves time thanks to one-step polishing process
    High efficiency
    High gloss Level
    Silicone-free

How to use:

    Clean surface thoroughly prior to polishing.
    Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm).
    Use the Menzerna Heavy Cut Foam Pad or Menzerna Lambs wool in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms.
    Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine by 10%.
    If working on very dry coatings, spray a little water onto the surface to prevent dust formation.
    At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
    Once you have finished polishing, remove any residue with our Microfiber cloth, without applying any pressure.

Cut: 8
Gloss: 8

Capacity: 250ml